Evaluasi Komparatif Model Regresi Nonlinear untuk Ketergantungan Suhu Kekuatan Luluh Paduan Aluminium AA 5083 Menggunakan Kriteria Informasi dan Validasi Silang

Comparative Evaluation of Nonlinear Regression Model for Yield Strength Temperature Dependence of AA 5083 Aluminum Alloy Using Information Criteria and Cross-Validation

Authors

  • Audi Pitaloka Universitas Pertahanan Republik Indonesia
  • Sovian Aritonang Universitas Pertahanan Republik Indonesia

Keywords:

AA 5083-H111, Kekuatan Luluh, Temperatur, Regresi Nonlinear, Pemodelan Matematis

Abstract

Evaluasi Komparatif Model Regresi Nonlinear untuk Ketergantungan Suhu Kekuatan Luluh Paduan Aluminium AA 5083 Menggunakan Kriteria Informasi dan Validasi Silang. Perubahan temperatur dapat memengaruhi sifat mekanik material aluminium, khususnya kekuatan luluh yang menjadi salah satu parameter penting dalam evaluasi kemampuan material menahan beban. Penelitian ini bertujuan untuk mengevaluasi dan membandingkan beberapa model regresi dalam menggambarkan hubungan antara temperatur dan kekuatan luluh paduan aluminium AA 5083-H111. Data penelitian diperoleh dari hasil eksperimen terdahulu yang mencakup tujuh titik pengamatan pada rentang temperatur . Metode yang digunakan meliputi regresi linear, regresi polinomial orde dua, dan regresi eksponensial. Evaluasi model dilakukan menggunakan koefisien determinasi  Root Mean Square Error (RMSE), Mean Absolute Percentage Error (MAPE), Corrected Akaike Information Criterion (AICc), serta validasi silang Leave-One-Out Cross-Validation (LOOCV). Hasil penelitian menunjukkan bahwa model polinomial orde dua memberikan kinerja terbaik di antara model yang dibandingkan, dengan nilai  sebesar 0,9831, RMSE sebesar 2,4672 MPa, MAPE sebesar  AICc sebesar 40,6434, dan RMSE LOOCV sebesar 5,4335 MPa. Hasil tersebut menunjukkan bahwa model polinomial mampu menggambarkan pola perubahan kekuatan luluh terhadap temperatur pada data yang dianalisis. Namun, karena jumlah pengamatan terbatas, model ini masih memerlukan pengujian menggunakan data eksperimen tambahan sebelum diterapkan dalam evaluasi teknis material.

References

Abuzaid, W., Hawileh, R., & Abdalla, J. (2021). Mechanical properties of strengthening 5083-H111 aluminum alloy plates at elevated temperatures. Infrastructures, 6(6), 87. https://doi.org/10.3390/infrastructures6060087

Ben Said, L., Chabchoub, A. K., & Wali, M. (2023). Mathematical model describing the hardening and failure behaviour of aluminium alloys: Application in metal shear cutting process. Mathematics, 11(9), 1980. https://doi.org/10.3390/math11091980

Chapelle, O., Vapnik, V., & Bengio, Y. (2002). Model selection for small sample regression. Machine Learning, 48, 9–23. https://doi.org/10.1023/A:1013943418833

Chen, S. R., Wu, C. Y., Ou, Y. L., & Yeh, Y. L. (2014). Hot deformation resistance of an AA5083 alloy under high strain rate. Key Engineering Materials, 626, 553–560. https://doi.org/10.4028/www.scientific.net/KEM.626.553

Chicco, D., Warrens, M. J., & Jurman, G. (2021). The coefficient of determination R-squared is more informative than SMAPE, MAE, MAPE, MSE and RMSE in regression analysis evaluation. PeerJ Computer Science, 7, e623. https://doi.org/10.7717/peerj-cs.623

Dastgiri, M. S., Fuerth, Z., Kiawi, L., & Green, D. (2023). Experimental study on high temperature tensile behaviour of aluminium alloy AA5083 with oscillating load. Scientific Reports, 13, 13307. https://doi.org/10.1038/s41598-023-40527-5

Emmert-Streib, F., & Dehmer, M. (2019). Evaluation of regression models: Model assessment, model selection and generalization error. Machine Learning and Knowledge Extraction, 1(1), 521–551. https://doi.org/10.3390/make1010032

Follansbee, P. S., & Kocks, U. F. (1988). A constitutive description of the deformation of copper based on the use of the mechanical threshold stress as an internal state variable. Acta Metallurgica, 36, 81–93.

Guo, X., Tao, L., Zhu, S., & Zong, S. (2020). Experimental investigation of mechanical properties of aluminum alloy at high and low temperatures. Journal of Materials in Civil Engineering, 32(2), 06019016. https://doi.org/10.1061/(ASCE)MT.1943-5533.0003002

Huda, Z., Zaharinie, T., & Min, G. J. (2010). Temperature effects on material behavior of aerospace aluminum alloys for subsonic and supersonic aircrafts. Journal of Aerospace Engineering, 23, 124–128.

Hurvich, C. M., & Tsai, C.-L. (1989). Regression and time series model selection in small samples. Biometrika, 76(2), 297–307. https://doi.org/10.1093/biomet/76.2.297

Kocks, U. F. (2001). Realistic constitutive relations for metal plasticity. Materials Science and Engineering: A, 317, 181–187.

Ma, R., Truster, T. J., Puplampu, S. B., & Penumadu, D. (2018). Investigating mechanical degradation due to fire exposure of aluminum alloy 5083 using crystal plasticity finite element method. International Journal of Solids and Structures, 134, 151–160.

Picard, R. R., & Cook, R. D. (1984). Cross-validation of regression models. Journal of the American Statistical Association, 79(387), 575–583. https://doi.org/10.1080/01621459.1984.10478083

Prakash, G., Singh, N. K., Sharma, P., & Gupta, N. K. (2020). Tensile, compressive, and flexural behaviors of Al5052-H32 in a wide range of strain rates and temperatures. Journal of Materials in Civil Engineering, 32(5), 04020090. https://doi.org/10.1061/(ASCE)MT.1943-5533.0003154

Snee, R. D. (1977). Validation of regression models: Methods and examples. Technometrics, 19(4), 415–428. https://doi.org/10.1080/00401706.1977.10489581

Summers, P. T., Case, S. W., & Lattimer, B. Y. (2014). Residual mechanical properties of aluminum alloys AA5083-H116 and AA6061-T651 after fire. Engineering Structures, 76, 49–61. https://doi.org/10.1016/j.engstruct.2014.06.033

Summers, P. T., Mouritz, A. P., Case, S. W., & Lattimer, B. Y. (2015). Microstructure-based modeling of residual yield strength and strain hardening after fire exposure of aluminum alloy 5083-H116. Materials Science and Engineering: A, 632, 14–28. https://doi.org/10.1016/j.msea.2015.02.026

Su, M.-N., & Young, B. (2019). Material properties of normal and high strength aluminium alloys at elevated temperatures. Thin-Walled Structures, 137, 463–471. https://doi.org/10.1016/j.tws.2019.01.012

Varshni, Y. P. (1970). Temperature dependence of the elastic constants. Physical Review B, 2, 3952–3958.

Zhou, J., Hayden, M., & Gao, X. (2013). An investigation of the strain rate and temperature effects on the plastic flow stress and ductile failure strain of aluminum alloys 5083-H116, 6082-T6 and a 5183 weld metal. Proceedings of the Institution of Mechanical Engineers, Part C: Journal of Mechanical Engineering Science, 227(5). https://doi.org/10.1177/0954406212450962

Downloads

Published

2026-11-20

How to Cite

Pitaloka, A., & Aritonang, S. (2026). Evaluasi Komparatif Model Regresi Nonlinear untuk Ketergantungan Suhu Kekuatan Luluh Paduan Aluminium AA 5083 Menggunakan Kriteria Informasi dan Validasi Silang: Comparative Evaluation of Nonlinear Regression Model for Yield Strength Temperature Dependence of AA 5083 Aluminum Alloy Using Information Criteria and Cross-Validation. Barongko: Jurnal Ilmu Kesehatan, 5(1), 2486–2493. Retrieved from https://jurnal.agdosi.com/index.php/Barongko/article/view/2040

Most read articles by the same author(s)

1 2 3 4 > >>