Identifikasi Faktor Efisiensi Penguatan Komposit Epoksi Berpenguat Serat Alam Menggunakan Aturan Campuran Termodifikasi dan Metode Kuadrat Terkecil

Identification of Reinforcement Efficiency Factors in Natural Fiber–Reinforced Epoxy Composites Using a Modified Rule of Mixtures and the Least-Squares Method

Authors

  • Evani Shilo Manullang Universitas Pertahanan Republik Indonesia
  • Sovian Aritonang Universitas Pertahanan Republik Indonesia

DOI:

https://doi.org/10.59585/bajik.v5i1.2014

Keywords:

Komposit Serat Alam, Aturan Campuran, Faktor Efisiensi, Kuadrat Terkecil, Batas Voigt–Reuss

Abstract

Komposit polimer yang diperkuat serat alam (NFRPC) banyak dilirik sebagai pengganti komposit serat sintetis karena bobotnya ringan dan sifatnya berkelanjutan, namun data sifat mekanik yang tersedia di literatur menunjukkan sebaran yang lebar. Studi ini menyusun sebuah kerangka matematis agar data tersebut dapat ditafsirkan secara kuantitatif. Sebanyak 35 sistem komposit epoksi dengan tujuh jenis penguat serat alam (rami, hemp, sisal, jute, pisang, sabut kelapa, kenaf) yang dikumpulkan dari kajian pustaka terkini dianalisis dengan batas Voigt–Reuss, aturan campuran termodifikasi yang memuat faktor efisiensi η, regresi kuadrat terkecil, analisis varians (ANOVA), serta model kinetika degradasi orde-satu. Melalui penapisan terhadap batas atas Voigt, ditemukan tiga data modulus yang tidak masuk akal secara fisis. Dari 32 data yang tersisa, diperoleh modulus matriks efektif Em = 2,42 ± 0,77 GPa, faktor efisiensi modulus ηE = 0,163 ± 0,038, dan faktor efisiensi kekuatan ησ = 0,173 ± 0,037. Sebagian besar data modulus, yakni 23 dari 32, terletak di bawah batas bawah Reuss sehingga mengisyaratkan lemahnya penyaluran tegangan antara serat dan matriks. Pemberian perlakuan kimia menaikkan ησ secara bermakna, dari 0,052 pada serat tanpa perlakuan menjadi 0,195–0,238 (ANOVA: F(4,27) = 3,13; p = 0,031). Kekuatan tarik memiliki hubungan positif dengan fraksi volume serat (r = 0,536; p = 0,002). Berdasarkan model kinetika orde-satu, waktu paruh degradasi komposit biodegradabel diperkirakan berada pada rentang 201 hingga 955 hari. Kerangka yang diusulkan berpotensi dimanfaatkan untuk menyaring data sekaligus sebagai dasar perancangan awal komposit serat alam.

References

Ajayi, N. E., Rusnakova, S., Ajayi, A. E., Ogunleye, R. O., Agu, S. O. and Amenaghawon, A. N. (2025) ‘A Comprehensive Review of Natural Fiber Reinforced Polymer Composites as Emerging Materials for Sustainable Applications’, Applied Materials Today, 43, p. 102666.

Draper, N. R. and Smith, H. (1998) Applied Regression Analysis. 3rd edn. New York: Wiley.

Hull, D. and Clyne, T. W. (1996) An Introduction to Composite Materials. 2nd edn. Cambridge: Cambridge University Press.

Kelly, A. and Tyson, W. R. (1965) ‘Tensile Properties of Fibre-Reinforced Metals: Copper/Tungsten and Copper/Molybdenum’, Journal of the Mechanics and Physics of Solids, 13(6), pp. 329–350.

Krenchel, H. (1964) Fibre Reinforcement. Copenhagen: Akademisk Forlag.

Madsen, B. and Lilholt, H. (2003) ‘Physical and Mechanical Properties of Unidirectional Plant Fibre Composites—An Evaluation of the Influence of Porosity’, Composites Science and Technology, 63(9), pp. 1265–1272.

Montgomery, D. C. (2017) Design and Analysis of Experiments. 9th edn. Hoboken, NJ: Wiley.

Ramful, R. (2024) ‘Mechanical Performance and Durability Attributes of Biodegradable Natural Fibre-Reinforced Composites—A Review’, Journal of Materials Science: Materials in Engineering, 19, p. 50. doi: 10.1186/s40712-024-00198-0.

Reuss, A. (1929) ‘Berechnung der Fließgrenze von Mischkristallen auf Grund der Plastizitätsbedingung für Einkristalle’, ZAMM – Zeitschrift für Angewandte Mathematik und Mechanik, 9(1), pp. 49–58.

Temesgen, A. G., Kaufmann, J. and Cebulla, H. (2026) ‘Mechanical Performance of Natural Fiber Reinforced Polymer Composites with Critical Assessment of Recent Advances and Future Perspectives’, Discover Materials, 6, p. 205. doi: 10.1007/s43939-026-00673-9.

Thimmegowda, D. Y., Hindi, J., Markunti, G. B. and Kakunje, M. (2025) ‘Enhancement of Mechanical Properties of Natural Fiber Reinforced Polymer Composites Using Different Approaches—A Review’, Journal of Composites Science, 9(5), p. 220.

Voigt, W. (1889) ‘Über die Beziehung zwischen den beiden Elasticitätsconstanten isotroper Körper’, Annalen der Physik, 274(12), pp. 573–587.

Ajayi, N. E., Rusnakova, S., Ajayi, A. E., Ogunleye, R. O., Agu, S. O. and Amenaghawon, A. N. (2025) ‘A Comprehensive Review of Natural Fiber Reinforced Polymer Composites as Emerging Materials for Sustainable Applications’, Applied Materials Today, 43, p. 102666.

Draper, N. R. and Smith, H. (1998) Applied Regression Analysis. 3rd edn. New York: Wiley.

Hull, D. and Clyne, T. W. (1996) An Introduction to Composite Materials. 2nd edn. Cambridge: Cambridge University Press.

Kelly, A. and Tyson, W. R. (1965) ‘Tensile Properties of Fibre-Reinforced Metals: Copper/Tungsten and Copper/Molybdenum’, Journal of the Mechanics and Physics of Solids, 13(6), pp. 329–350.

Krenchel, H. (1964) Fibre Reinforcement. Copenhagen: Akademisk Forlag.

Madsen, B. and Lilholt, H. (2003) ‘Physical and Mechanical Properties of Unidirectional Plant Fibre Composites—An Evaluation of the Influence of Porosity’, Composites Science and Technology, 63(9), pp. 1265–1272.

Montgomery, D. C. (2017) Design and Analysis of Experiments. 9th edn. Hoboken, NJ: Wiley.

Ramful, R. (2024) ‘Mechanical Performance and Durability Attributes of Biodegradable Natural Fibre-Reinforced Composites—A Review’, Journal of Materials Science: Materials in Engineering, 19, p. 50. doi: 10.1186/s40712-024-00198-0.

Reuss, A. (1929) ‘Berechnung der Fließgrenze von Mischkristallen auf Grund der Plastizitätsbedingung für Einkristalle’, ZAMM – Zeitschrift für Angewandte Mathematik und Mechanik, 9(1), pp. 49–58.

Temesgen, A. G., Kaufmann, J. and Cebulla, H. (2026) ‘Mechanical Performance of Natural Fiber Reinforced Polymer Composites with Critical Assessment of Recent Advances and Future Perspectives’, Discover Materials, 6, p. 205. doi: 10.1007/s43939-026-00673-9.

Thimmegowda, D. Y., Hindi, J., Markunti, G. B. and Kakunje, M. (2025) ‘Enhancement of Mechanical Properties of Natural Fiber Reinforced Polymer Composites Using Different Approaches—A Review’, Journal of Composites Science, 9(5), p. 220.

Voigt, W. (1889) ‘Über die Beziehung zwischen den beiden Elasticitätsconstanten isotroper Körper’, Annalen der Physik, 274(12), pp. 573–587.

Downloads

Published

2026-11-17

How to Cite

Manullang, E. S., & Aritonang, S. (2026). Identifikasi Faktor Efisiensi Penguatan Komposit Epoksi Berpenguat Serat Alam Menggunakan Aturan Campuran Termodifikasi dan Metode Kuadrat Terkecil: Identification of Reinforcement Efficiency Factors in Natural Fiber–Reinforced Epoxy Composites Using a Modified Rule of Mixtures and the Least-Squares Method. Barongko: Jurnal Ilmu Kesehatan, 5(1), 2271–2280. https://doi.org/10.59585/bajik.v5i1.2014