Environmental Degradation And Protective Performance Of Polyurethane Coatings In Tropical Maritime Environments : A Critical Review For Defence Applications

Authors

  • Ridha Putri Anandari Nur Republic of Indonesia Defence University
  • Sovian Aritonang Republic of Indonesia Defence University
  • Hotma Renta Siringo Ringo Republic of Indonesia Defense University

DOI:

https://doi.org/10.59585/bajik.v5i1.2008

Keywords:

Polyurethane Coatings, Environmental Degradation, Tropical Maritime Environment, Protective Performance, Defence Equipment

Abstract

Polyurethane (PU) coatings are widely used as protective materials due to their flexibility, abrasion resistance, chemical resistance, and weathering performance. However, their protective properties may deteriote under the combined environmental conditions of tropical maritime environments. This study presents a critical review of the environmental degradation mechanisms and protective performance of PU coatings, with particular emphasis on ther implications for defence-related equipment. The review examines existing studies on environmental stressors, including ultraviolet radiation, temperature, humidity, water exposure, marine salts, and, mechanical wear. The reported degradation mechanisms, particularly photo-oxidation, hydrolysis, thermal degradtion, and water-assisted interfacial degradation, are evaluated in relation to changes in coating properties. The findings indicate that enironmental exposure can reduce adhesion, tensile properties, surface integrity, and barrier performance, although the extent of deterioration depends on coating formulation, substrate, and exposure conditions. Therefore, coating durability should be evaluated by considering the specific material system, environmental conditions, and operational requirements

References

Cai, G., Wang, H., Jiang, D., & Dong, Z. (2018). Degradation of fluorinated polyurethane coating under UVA and salt spray. Part I: Corrosion resistance and morphology. Progress in Organic Coatings, 123, 337–349. https://doi.org/10.1016/j.porgcoat.2018.07.025

Davies, P., & Evrard, G. (2007). Accelerated ageing of polyurethanes for marine applications. Polymer Degradation and Stability, 92(8), 1455–1464. https://doi.org/10.1016/j.polymdegradstab.2007.05.016

He, S., Xiong, J., Tang, Y., & Zuo, Y. (2011). The failure behavior of a polyurethane composite coating in 3.5% NaCl solution under ultraviolet irradiation. Journal of Applied Polymer Science, 120(4), 1892–1898. https://doi.org/10.1002/app.33301

International Organization for Standardization (ISO). (2012). ISO 9223:2012: Corrosion of metals and alloys—Corrosivity of atmospheres—Classification, determination and estimation. Geneva: ISO. https://www.iso.org/standard/53499.html

Jacobs, D. S., Huang, S.-R., Cheng, Y.-L., Rabb, S. A., Gorham, J. M., Yu, L. L., Nguyen, T., & Sung, L.-P. (2016). Surface degradation and nanoparticle release of a commercial nanosilica/polyurethane coating under UV exposure. Journal of Coatings Technology and Research, 13(5), 735–751. https://doi.org/10.1007/s11998-016-9796-2

Liu, J., Li, Z., Zhang, L., Hou, J., Lu, Z., Zhang, P., Wang, B., & Jin, N. (2019). Degradation behavior and mechanism of polyurethane coating for aerospace application under atmospheric conditions in South China Sea. Progress in Organic Coatings, 136, 105310. https://doi.org/10.1016/j.porgcoat.2019.105310

Lu, F., Song, B., He, P., Wang, Z., & Wang, J. (2017). Electrochemical impedance spectroscopy (EIS) study on the degradation of acrylic polyurethane coatings. RSC Advances, 7, 13742–13748. https://doi.org/10.1039/C6RA26341K

Ma, J., Guo, H., Zhang, X., Li, C., Xie, J., Luo, L., Zhou, K., & Liu, J. (2023). Failure behavior of polyurethane coating immersed in real seawater. Surface Technology, 52(1), 178–186. https://doi.org/10.16490/j.cnki.issn.1001-3660.2023.01.018

Mayer-Trzaskowska, P., Robakowska, M., Gierz, Ł., Pach, J., & Mazur, E. (2023). Observation of the effect of aging on the structural changes of polyurethane/polyurea coatings. Polymers, 16(1), 23. https://doi.org/10.3390/polym16010023

Mayer-Trzaskowska, P., Ferraris, M., Perero, S., & Robakowska, M. (2025). The influence of the addition of rubber waste on the properties of polyurethane coatings subjected to aging processes. Coatings, 15(6), 677. https://doi.org/10.3390/coatings15060677

Mushtaq, M., Gulipalli, P., Adusumalli, R., Suresh, K., & Abraham, A. (2025). Effect of 200 days of cyclic weathering and salt spray on the performance of PU coating applied on a composite substrate. Science and Engineering of Composite Materials, 32(1), 20250055. https://doi.org/10.1515/secm-2025-0055

Oehler, H., Wanner, M., Aktas, L., Neumann, M., Lellinger, D., et al. (2025). Site-specific weathering of coatings: II. Comparison of natural weathering and accelerated protocols for Central Europe and Florida. Journal of Coatings Technology and Research, 22, 739–761. https://doi.org/10.1007/s11998-024-01005-3

Priyotomo, G., Prifiharni, S., Nuraini, L., Triwardono, J., Royani, A., Sundjono, Purawiardi, I., & Gunawan, H. (2021). A field study of atmospheric corrosion of carbon steel after short exposure in Pelabuhan Ratu, West Java Province, Indonesia. Walailak Journal of Science and Technology, 18(17), Article 9667. https://doi.org/10.48048/wjst.2021.9667

Sabet-Bokati, K., & Plucknett, K. (2024). Water-induced failure in polymer coatings: Mechanisms, impacts and mitigation strategies—A comprehensive review. Polymer Degradation and Stability. https://doi.org/10.1016/j.polymdegradstab.2024.111058

Suo, H., Akhtar, A., Zhang, Y., Arshad, A., Xin, Y., Lam, R. K. H., Tang, H. P., & Voyle, R. (2026). Degradation kinetics and critical failure transition of polyurethane/epoxy aircraft coatings under accelerated cyclic aging conditions. Engineering Failure Analysis, 193, 110878. https://doi.org/10.1016/j.engfailanal.2026.110878

Wang, J., Gu, Z., Zhao, J., Zhang, S., Li, P., Meng, C., Sui, J., Zhang, X., Hu, S., Pan, J., & Li, J. (2022). Aging behavior of the three-proof polyurethane coating under UV radiation. Polimery, 67(9), 433–?. https://doi.org/10.14314/polimery.2022.9.4

Wang, S., Wang, D., An, Q., Li, J., Chong, K., Wang, X., Liu, J., Xie, K., Hou, X., Hou, J., & Sun, Y. (2025). Multi-regional natural aging behaviors and degradation mechanisms of polyurethane-coated fabrics under coupled multiple environmental factors. Polymers, 17(19), 2634. https://doi.org/10.3390/polym17192634

Wilhelm, C., Rivaton, A., & Gardette, J.-L. (1998). Infrared analysis of the photochemical behaviour of segmented polyurethanes: 3. Aromatic diisocyanate based polymers. Polymer, 39(5), 1223–1232. https://doi.org/10.1016/S0032-3861(97)00353-4

Zhang, H., Dun, Y., Tang, Y., Zuo, Y., & Zhao, X. (2016). Correlation between natural exposure and artificial ageing test for typical marine coating systems. Journal of Applied Polymer Science, 133(36), 43893. https://doi.org/10.1002/app.43893

Zhang, C., Zhu, Z., & Zhao, J. (2021). Property comparison of two water-based polyurethane coatings in three accelerated aging experiments. Surface Technology, 50(10), 330–336. https://doi.org/10.16490/j.cnki.issn.1001-3660.2021.10.034

Downloads

Published

2026-11-17

How to Cite

Nur, R. P. A., Aritonang, S., & Ringo, H. R. S. (2026). Environmental Degradation And Protective Performance Of Polyurethane Coatings In Tropical Maritime Environments : A Critical Review For Defence Applications. Barongko: Jurnal Ilmu Kesehatan, 5(1), 2221–2232. https://doi.org/10.59585/bajik.v5i1.2008

Most read articles by the same author(s)

<< < 1 2 3 4 > >>