Graphene Oxide/Fe₃O₄ Composites for Electromagnetic Wave Absorption in Radar Absorbing Material (RAM) Applications: A Critical Review of Design Principles, Loss Mechanisms and Performance

Authors

  • Ayyash Khoyyir Ahmad Kemal Universitas Pertahanan Republik Indonesia
  • Sovian Aritonang Universitas Pertahanan Republik Indonesia
  • Hotma Renta R Siringoringo Universitas Pertahanan Republik Indonesia
  • Muhammad Hafidh Husna Universitas Pertahanan Republik Indonesia
  • Afriza Rizky Putra Adjie Universitas Pertahanan Republik Indonesia
  • Muhammad Rizky Dayrobby Universitas Pertahanan Republik Indonesia

DOI:

https://doi.org/10.59585/ijhs.v4i4.2043

Keywords:

Graphene Oxide, Fe₃O₄, Microwave Absorption, Radar Absorbing Material, Reflection Loss

Abstract

Graphene oxide (GO) and reduced graphene oxide (rGO) decorated with magnetite (Fe₃O₄) are among the most studied dielectric–magnetic hybrids for microwave absorption, yet their value for radar absorbing materials (RAM) is rarely judged against RAM-specific demands. This review surveys the field from three angles: how the oxidation degree of GO tunes permittivity and impedance matching; how synthesis routes set the Fe₃O₄ size, loading and interface quality; and how the resulting loss mechanisms translate into reflection loss (RL), effective absorption bandwidth (EAB) and matching thickness. Across roughly twenty representative studies, the best GO/rGO–Fe₃O₄ systems reach RLmin between about −43 and −66 dB at 2–3 mm, with EAB of 6–7 GHz in the Ku-band at low filler loadings (8–10 wt%) when a porous or hierarchical structure is used. Performance is strongly ratio-dependent, and a counter-example shows that pure Fe₃O₄ can outperform a poorly structured Fe₃O₄/rGO hybrid. Most work uses rGO rather than GO, so the benefit of retaining oxygen functional groups remains under-explored. We also discuss the unresolved debate on how RL and impedance matching should be interpreted, the weak comparability of paraffin-based coupon data, and the thin evidence for coating-scale, free-space or radar cross section (RCS) validation. A characterisation checklist for the graphene component, a reporting checklist and research priorities toward RAM-ready GO/Fe₃O₄ absorbers are proposed.

Downloads

Download data is not yet available.

Downloads

Published

2026-11-20

How to Cite

Kemal, A. K. A., Aritonang, S., Siringoringo, H. R. R., Husna, M. H., Adjie, A. R. P., & Dayrobby, M. R. (2026). Graphene Oxide/Fe₃O₄ Composites for Electromagnetic Wave Absorption in Radar Absorbing Material (RAM) Applications: A Critical Review of Design Principles, Loss Mechanisms and Performance . International Journal of Health Sciences, 4(4), 1400–1417. https://doi.org/10.59585/ijhs.v4i4.2043